The thickness of the school locker

Writer：Huadu Steel Furniture ：2020-07-14 14:42 Browse：℃

　　The thickness of the school locker metal sheet is very important for quality, not only because the metal sheet is the main raw material of the school locker, but also the main part of the load-bearing. If the thickness of the metal sheet is very thin, it is easy to cause insufficient load bearing of this locker. Therefore, you need to understand this knowledge about the thickness of the school locker.

　　In general, the thickness of the school locker is not just the thickness of the finished cabinet, we also have to consider the thickness of its raw materials, that is, the thickness of the bare board and the thickness of the spray. The thickness of the bare board is the basic thickness of the metal sheet without any treatment. The thickness of the coating refers to the final thickness of the metal sheet after the powder coating process. At present, the thickness of high-quality bare boards on the market should be about 0.6mm, and the thickness of spraying should be about 0.8mm.

　　Therefore, when we buy school lockers, we need to understand what kind of thickness the manufacturer is talking about, so that we can be aware of it. If the manufacturer regards the thickness of the coating as the thickness of the bare board, then it will be too late after we buy back the product. This is also the usual method used by many immoral manufacturers.

　　When we need to measure the thickness of the steel locker, the best way is to use an accurate ruler to measure, so that the data obtained is more accurate. Some consumers like to measure the thickness through eye observation. This method has a very large error, so this method is not recommended.

　　As a user, we should also pay attention to the thickness of the school locker. Thickness is only one aspect of quality. In addition to the thickness, we must also consider other aspects.