What is the thickness of the sheet metal reference cabinet ?

Writer：Huadu Steel Furniture ：2020-04-17 11:51 Browse：℃

　　When processing the sheet metal reference cabinet, the sheet metal thickness is a very important parameter, which determines whether the quality of the finished product produced is good enough, and also determines the service life of the sheet metal reference cabinet.Therefore, when we buy the iron sheet reference cabinet, we should focus on how much is the iron sheet thickness of the processing iron sheet reference cabinet, and whether the steel plate used by the manufacturer is produced by a large domestic steel mill.

　　The reason that wants to see the steel plate that the manufacturer uses is not the reason that the large steel is produced, also be same with us to choose manufacturer of large sheet metal reference cabinet actually.The quality of steel plate produced by large steel mills is more guaranteed, which is used as the raw material of the iron sheet reference cabinet to produce better product quality.Domestic large steel mill has anshan iron and steel, baosteel and so on manufacturer, because this we can ask them when choosing the steel mill that they cooperate is which.

　　And the sheet metal thickness of the processing sheet metal reference cabinet is different because of each manufacturer, the thickness used is not the same.For example, some manufacturers use the 0.6mm bare plate, some manufacturers use the 0.4mm bare plate thickness, and even some manufacturers use the 0.3mm bare plate thickness, the thickness of these different will determine the quality of the sheet metal reference cabinet, and the weight of the sheet metal reference cabinet in the actual use.

　　The advice I give you here is that it is better to choose 0.6mm bare plate thickness when choosing the thickness of the sheet metal reference cabinet, so that the bearing weight of the cabinet can reach 60KG per layer.If the selected thickness is too thin, then may occur in the use of the clapboard bending, frame tilt and so on, the use experience is very bad.

　　Of course, in the specific purchase, we still need to consider the thickness of the sheet metal reference cabinet according to the demand.If normally placed files are heavier, then choose a little thicker, if placed files are lighter, you do not have to choose too thick, the normal thickness on the market can meet our use.